11.50 10.00 (typ.) 41.90 37.10 03554 a.g. sep.10,09 proposal sep.10,09 d c b a a b c d amphenol canada corp. ref. scale size project P-U77-C161X-X001 title 1x1 sfp+ cage, tolerances are: decimals angles gasket with light pipe date approvals drawn approved dwg. no. a3 sheet a.g ecn/e-r j.si checked chigowx rev. sep.10,09 qa appd ie app'd dwg app'd unless otherwise specified 1 0.10 material and finish see note 1 do not scale drawing 1 2 3 4 5 6 8 8 7 6 5 4 32 1 revisions rev. a date 1 of 4 spring finger&with solder pins, description or used for manufacturing puposes without permission from amphenol canada corp. designed 3:1 a 7 code ident. no. dimensions are in millimeters x.x 0.15 x.xx this document contains proprietary information and such information may not be disclosed to others for any purpose sep.10,09 sfp+ soldering pins cage (p/n: u77-a163x-x001 if ordered seperately) sfp+ press fit cage (p/n: u77-1163-2010p if ordered seperately) material: cage: copper alloy. plating:(see part number for option) option1:100" [2.54m] min. bright tin plating over 50 " (1.27 m)min. nickel under plating.(bright tin temperature 230 c max.). option3:100"[2.54 m] min. matte tin plating over 50 " (1.27 m)min. nickel under plating.(matte tin 245 c max. in 10 seconds of peak time, ) light pipe: clear polycarbonate. light pipe bracket: stainless steel. packaging: tray packaging. temperature range: -40c to 85c. 3 = matte tin plating 1 = tray packaging 1 = bright tin plating 1 cage plating: 0 0 packaging: amphenol part number configuration u 7 7 - c 1 6 1 x - x solder tail height: 3 = 3.2 mm(see dim"x" ) 4 = 1.8 mm(see dim"x" ) 0.10 9.00 5.84 14.25 14.000.10 15.01 16.26 55.20 14.20 dim"x" 2.30 1.60 12.95
11.50 10.00 (typ.) 37.10 16.26 15.00 4.15 20.00 dim"x" 14.15 48.98 code ident. no. 03554 chigowx j.si a 7 P-U77-C161X-X001 a a.g. sep.10,09 a.g sep.10,09 d c b a a b 2 of 4 1 scale size project dwg. no. a3 sheet rev. 1x1 sfp+ cage, 3 c d amphenol canada corp. 3:1 2 designed tolerances are: or used for manufacturing puposes without permission from amphenol canada corp. ref. ecn/e-r decimals angles gasket with light pipe date approvals drawn checked qa appd ie app'd dwg app'd unless otherwise specified 1 0.10 material and finish see note 1 do not scale drawing 1 2 3 4 5 6 8 8 7 6 5 4 title rev. description date approved proposal sep.10,09 revisions spring finger&with solder pins, dimensions are in millimeters x.x 0.15 x.xx this document contains proprietary information and such information may not be disclosed to others for any purpose sep.10,09 45.48 14.98 packaging: solder tail height: 1 = tray packaging cage plating: 1 = bright tin plating 3 = 3.2 mm(see dim"x" ) 3 = matte tin plating 4 = 1.8 mm(see dim"x" ) amphenol part number configuration u 7 7 - a 1 6 3 x - x 0 0 1 9.000.10 14.000.10
15.250.10 8.03 15.250.10 5.84 2.54 (typ.) a a 16.25 min section a-a pcb 0.30 3.50 (panel cut below pcb) 10.40 0.10 0.10 0.25 1.57 1.700.90 ecn/e-r designed d c b a a b c d amphenol canada corp. ref. scale size project dwg. no. a3 sheet sep.10,09 a.g. gasket with light pipe date approvals drawn checked qa appd ie app'd 3 of 4 rev. 1x1 sfp+ cage, tolerances are: a spring finger&with solder pins, P-U77-C161X-X001 dwg app'd sep.10,09 decimals angles dimensions are in millimeters unless otherwise specified 1 0.10 material and finish see note 1 do not scale drawing 1 2 3 4 5 6 8 8 7 6 5 4 32 1 revisions rev. description date approved or used for manufacturing puposes without permission from amphenol canada corp. title a.g sep.10,09 3:1 a 7 code ident. no. 03554 chigowx j.si proposal x.x 0.15 x.xx this document contains proprietary information and such information may not be disclosed to others for any purpose sep.10,09 recommended bezel design
0 10.00 20.00 22.80 27.50 30.00 32.50 37.10 4.50 41.90 5.00 15.00 25.00 30.90 35.00 0 5.68 8.58 11.08 14.25 2.33 7.13 11.93 (see note 1) bsc b x this area denotes components keep-out (traces allowed) z x s m x s z cross-hatched area denotes component and trace keep-out (except chassis ground) 0.1 z x s 0.1 m m y x 0.1 -z- 0.1 m y c 1.05 0.00 0.05 1.05 (10 plcs) 0.05 (plated hole) 0.85 0.95 (9 plcs) a.g sep.10,09 d c b a a b c d amphenol canada corp. ref. scale size project dwg. no. a3 sheet sep.10,09 a.g. gasket with light pipe date approvals drawn checked qa appd ie app'd 4 of 4 rev. 1x1 sfp+ cage, tolerances are: a spring finger&with solder pins, P-U77-C161X-X001 dwg app'd title decimals angles dimensions are in millimeters unless otherwise specified 1 0.10 material and finish see note 1 do not scale drawing 1 2 3 4 5 6 8 8 7 6 5 4 32 1 revisions rev. description date approved proposal sep.10,09 ecn/e-r designed 3:1 a 7 code ident. no. 03554 chigowx j.si or used for manufacturing puposes without permission from amphenol canada corp. x.x 0.15 x.xx this document contains proprietary information and such information may not be disclosed to others for any purpose sep.10,09 0.95 0.85 hole sizes 1.55 1.05 l x scale 4 : 1 detail b s -w- z 0.1 l w z v s x l 0.1 -v- 0.06 0.06 l w v (typ.) 4.10 (typ.) 0.05 1.55 9.60 2.50 0.500.03 (20 plcs) 1.00 (typ.) 2.000.03 (20 plcs) 4.10 0.80 1.40 9.60 typ. 3.60 1.550.05 detail c scale 6 : 1 2.000.10 (typ.) 0.10 (typ.) 2.00 1.05 notes: datum and basic dimensions established by customer. 1. pads and vias are chassis ground. 2. thru-holes plating optional. 3. see drawing p-u76-a20-x00xx for connector layout. 4.
|
